continuous welding
英 [kənˈtɪnjuəs ˈweldɪŋ]
美 [kənˈtɪnjuəs ˈweldɪŋ]
网络 连续焊
双语例句
- With continuous welding, spot welding and discontinuous welding functions, meet different welding requirements.
具有连续焊、点焊、间断焊功能，适合不同的焊接需要。 - The electron gun can be applied to occasions of high power welding and long-time continuous welding and occasions of high power electron beam melting, electron beam coating and the like.
这种电子枪可应用于大功率焊接，连续长时间焊接的场合以及大功率电子束熔炼，电子束镀膜的场合等。 - Possess the Functions of continuous welding, point welding and interval welding etc.
具备连续焊、点焊、间隙焊等功能。 - Contimuously adjustable current and voltage, wide adjustment range, high duty cycle, continuous welding.
电流电压边续可调，调节范围宽，负载持续率高，可连续焊接。 - Wear of Electrode and Surface Forming Quality in Continuous Spot Welding of Aluminum Allays
铝合金连续点焊时电极烧损与焊点表面质量的变化规律 - Single point and continuous points welding tests are performed by using different specifications and parameters respectively and some factors affecting welding quality are analyzed and some solutions are put forward.
分别采用不同的规范参数进行单点、连续点焊试验，对试验中影响焊接质量的因素加以分析，并提出解决方法。 - Influence of feeding speed of rail continuous flash welding on welding process
钢轨连续闪光焊送进速度对焊接过程的影响 - Results indicated that the temperature was much lower while discontinuous welding, but lower axial residual stress can be gained by continuous welding. The annular stress of discontinuous and continuous welding did not have much affection for the pipeline.
结果表明，间断焊可以降低焊接时的温度，而采用连续焊可以获得较小的轴向残余应力，间断焊和连续焊的环向应力对管道的影响不大。 - The Technology and Equipment of Continuous Welding for Double-Layer Welded Pipe
双层卷焊管连续焊接工艺与设备 - Process Eigenvalue and Quality of Continuous Flash Welding of Alloy Rail
合金钢轨连续闪光焊过程特征与质量 - The feeding speed of shifting unit of welding machine is one of the most important factors of rail continuous flash welding quality.
影响钢轨闪光焊接头焊接质量的因素很多，其中焊机动力柱的送进速度就是重要因素之一。 - SiC/ Carbon Ceramic Composite for Continuous Welding Wire Nozzle
连续束焊机焊丝嘴用碳陶瓷复合材料的研究 - The designed service life of the tank can be ensured by improved welding quality, application of continuous welding for the internal side of the tank top and strengthened inspection and maintenance.
保证焊缝质量，罐顶内侧焊缝改为连续焊以及加强设备巡检和维修等措施，可保证储罐达到设计使用周期。 - This welding process, with continuous welding wire feeding, fast deposit speed and quality welding pass, is especially suitable for long distance pipeline with large diameter and thick wall.
全位置自动焊接技术的特点是，焊丝可以连续送进，焊丝熔敷速度快，焊接质量较高，尤其适用于大口径、厚壁管的焊接。 - Flash can be continual and steady, and then, the good welding joints could be obtained by properly controlling feeding speed of shifting unit of rail continuous flash welding.
有效地控制钢轨连续闪光焊的动力柱送进速度，可以使整个焊接过程保持连续和稳定的闪光，从而获得优良的焊接接头。 - It is shown by experiments that this control method can effectively decrease spattering, slow down and uniformize electrode over-burning, improve stabilization of welding spot quality in continuous spot welding and abate the requirement for surface treatment quality of parts.
试验表明，该控制法可以有效地减少飞溅的发生，使电极的烧损变慢、变均匀，在连续点焊中还可以提高焊点质量的稳定性并降低对工件表面处理质量的要求。 - The continuous drive welding expert system has been finished, using VC++ 6.0 as the developing method, utilizing the SQL and the database Access.
软件上利用VC++6.0作为开发工具，结合SQL语言和Access数据库完成了功能的实现。 - The critical length for continuous welding of long bottom seams of large storage tank
大型贮罐罐底长缝连续焊接的临界宽度 - The program can be used to preliminarily predict the weld quality in technology experiments and in the continuous welding with electrode abrasion, the results of which can replace partly the weld destructive experiments as auxiliary criterion to set the welding conditions and judge the weld quality.
该有限元程序可以用于焊点质量预测以及电极磨损下的焊点质量初步预测，作为焊接参数设置及焊接质量判断的辅助依据，其结果可部分替代实际生产中的焊点破坏试验。 - The results indicate that defect free joints with excellent appearance could be acquired by continuous laser welding with flowing helium from top and back sides.
研究结果表明，连续激光氦气双面保护可以获得保护效果可靠、无缺陷、成型良好的焊接接头。 - The article describes the criteria for contact welding of coated steel plate, e · g ·, spot welding, flange welding, seam welding and continuous welding. And the electroplating, electrode and other concerned factors which would affect the welding quality are also discused.
对表面覆层钢板的接触焊&点焊、凸焊、缝焊及连续焊接的焊接规范，电流电极及所涉及到的一些影响质量的因素进行了论述。 - By the procedure of spraying the Ni-matrix alloy transition layer on the surface of casting defect and using multi-alloying cast iron homogeneous electrode with high welding current and continuous welding technique, obtained the homogeneous welding zone in which there is no chill structure and crack.
通过在铸件缺陷表面喷敷镍基合金过渡层，采用多元微合金化铸铁同质焊条大电流连续焊工艺，可获得无白口和裂纹的铸铁同质焊补区。 - Continuous drive friction welding is difficult to establish precise mathematical model and give digital control, so a continuous drive welding expert system is put forward.
针对连续驱动摩擦焊接难以建立精确的数学模型和全参数化准确控制的特点，提出了连续驱动摩擦焊接专家系统的控制方法。 - Study on Continuous Drive Friction Welding Expert System
连续驱动摩擦焊接专家系统研究 - Deoxidisation Degree and its Judgement for Continuous Cast Welding Rod Steel
连铸焊条钢H08的脱氧度及其判断 - Research and Development of Control System of Continuous Driven Friction Welding Machine
连续驱动摩擦焊机控制系统的研究与开发 - The results shows that on chill welding mend zone can be obtained by the biger welding electric current and continuous welding at 200 ℃.
结果表明，200℃大电流连续焊接可获得无白口的焊补区，焊缝由珠光体、少量铁素体加细小的片墨构成。 - Laser welding has characteristics of small deformation and better continuous welding sealing, which can solve this problem effectively.
激光焊接具有变形小、连续焊接密封性好等特点，可有效解决这一问题。 - T-tube radiator weld seam is a complex three-dimensional space curve and there is aluminum wing obstacle at vertical direction, interference phenomenon between risers at horizontal direction. It is difficult to achieve automatic continuous welding.
散热器T型管焊缝是一个复杂的空间三维曲线，并且在竖直方向上存在铝翼障碍、水平方向上存在多立管之间的干涉障碍，难以实现自动化连续焊接。 - The new system is a Chinese operating system under Windows platform and is compatible with continuous flash welding and pulse flash welding.
所开发的监控系统为WINDOWS平台下的中文操作系统，兼容连续闪光焊和脉冲闪光焊。